| |
Subject |
Author |
Date Posted |
Forum
|
 |
tire pressures
Just wondering what tire pressures most people run on their utility atvs. I have a bruin 350 4x4 that i just put a plow on. when i lift the plow the front tires seemed to press down a lot due to the extra weight. should i add pressure to the tires? Curious to see what pressures others use for daily use/ and if they change the pressure for plowing.
|
yamaha350rydr
|
09/02/08 10:04pm |
Utility/4x4
|
|
winch wrapping
I just installed a new winch on my Bruin 350 4x4. It is a Warn RT25 the one with steel cable. I was wondering how important it is how the cable wraps onto the drum. When just pulling in the line, it doesnt seem to wrap perfectly even. is it ok if the wrapping is a little messy or should it always wrap neatly.
Thanks
|
yamaha350rydr
|
07/24/08 09:29pm |
Utility/4x4
|
|
RE: 589 vs Mudlite
Thanks for all the help guys. Is the rubber compound soft on the mudlites, I don't want them to wear out too fast.
|
yamaha350rydr
|
07/10/08 08:05am |
Utility/4x4
|
|
RE: 589 vs Mudlite
I was considering XTRs as well, how do they compare to the XL and AT mudlites
|
yamaha350rydr
|
07/09/08 10:14am |
Utility/4x4
|
|
589 vs Mudlite
I'm thinking of replacing the stock tires on my 2006 Bruin 350 4X4 with one of these tires. Which is better for all around use?, mainly trails, some snow and mud. Which is lighter weight?(I don't want to lose too much power). If I go with the mudlites which would be better, the AT or the XL? Also, what do you think about the Mudlite XTRs compared to the 589s and the Mudlite AT and XL
Thanks,
John
|
yamaha350rydr
|
07/09/08 09:50am |
Utility/4x4
|
|
RE: Bruin Air filter
If I do have to oil it, do I need the special Yamalube Filter Oil, or is there anything else that will work.
|
yamaha350rydr
|
06/16/08 10:36pm |
Utility/4x4
|
|
Bruin Air filter
The air filter on my '06 Bruin 350 4x4 was really full of dust, so I bought a replacement filter(the spongy part). That just slides on over the plastic cylinder right? As for the old one, can I clean it and then re-use it when this one gets dirty? If so, how do I clean it out without damaging it. The guy at the dealership seemed to know nothing about filters so I figured I'd ask here. Also do I need to oil the new filter, or does it come pre-oiled.
Thanks
John
|
yamaha350rydr
|
06/16/08 06:13pm |
Utility/4x4
|
|
seafoam
ive heard of this used in cars and trucks to clean the junk out of the engine and fuel components, was wondering if anyone has used it in an ATV? If so, how much do you use, or is it not important. Also how do you add the seafoam, do you pour it straight into the carb?
If anyone has used this on an ATV id appreciate the input.
Thanks
|
yamaha350rydr
|
05/04/08 12:45am |
ATV Forum
|
|
setting idle speed
I just brougt my atv out for the season, 2006 bruin 350 4x4. i was wondering how to set the idle speed. i know where the adjustment screw is, im just not sure how to set it to the proper idle speed. anyone do this before? also, should i clean the carb or anything after sitting all winter? i put fuel stabilizer in it last fall, so im not sure if this is necessary.
thanks
|
yamaha350rydr
|
05/02/08 06:47pm |
Utility/4x4
|
